Community Tips & Fixes

ome tips for peeps with RS3's, who use only mamehooker and who suffer from occasional "config drift" e.g. gun 1 recoils gun 2, gun 2 and gun 1 fire at same time etc. This may work for HOTR if you run those scripts instead but that's untested my end

If your guns start to get confused try this (assuming everything was working before on all systems and com ports set to correct port for each device):

1: Reboot PC 2: Go into launchbox/emulators/demulshooter and check that guns are in correct player e.g. gun1 registers as player 1 and gun 2 player 2 3: Config lightguns from gun software in tools folder, do each gun 4: Run "set emulator to mamehooker script" - as administrator 5: Run "config guns for RS3 reapers" script - as administrator Everything should now work if it did before

Pre-requisites

1: Antivirus disabled on download location/including temp folder of zip download (AV can zap stuff as it downloads otherwise) 2: Disable AV for root of drive or it will zap stuff as it runs 3: COM ports setup correctly and settings surviving reboots (you can achieve this by turning things on the same way each time - for me I turn on the PC then the hub once booted with both guns attached - having both guns attached at both times if you have 2x rs3's seems to stop it getting mixed up) 4: Dont do the above with launchbox or bigbox open, or it wont work, do the above then open the front end